So I was looking to get back into sculpting and I recently built some armature stands. So I thought I’d take the time to share how I do this and what materials were used. There are many kind of stands out there and when you can find information on them you will see each sculptor has their own method. Finding tutorials and material list though never seams easy to find. I’ve done this tutorial with images, hope you like:

Step 1: Materials- 1 1/4″-20×12″ threaded rod, 2 1/4″-20 Wing nuts, 1 1/4″ T-Nut, 1/4″ Washer & Hex Nut, 1 10-24×6″ Threaded rod, 3 10-24 Wing Nuts, 1 10-24×3/4″ Machine Screw, 1 1″ “L” Bracket, 1 3″ Folding Door Hinge, 1 8″x8″x3/4″ Wood(optional sizes based on your needs).

Step 2: Drill 1/4″ hole in the corner of the wood not to close to the edge or it could crack.  Install your 1/4″ T-Nut(Optional I counter sunk my T-Nut with a 3/4″ Drill bit before installing.)

Step 3: Place your hex nut about an inch down the threaded rod and place your washer on. Now thread your 1/4″ Rod into the t-nut make sure not to go all the way through or it will not sit flush. Tighten hex nut like so

Step 4: You will need a Dremel or rotary tool to cut the hinge where its shown in the picture. After cutting the hinge you will need to expand the hinges pin hole enough so the 10-24 threaded rod can slide through without issue. I do not remember what drill bit I used for this. One hinge will make 4 Components and hinges tend to come in a two pack if you buy them, so you could make four armature stands from 2 hinges.

Step 5: After cutting and drilling the hinge part you will now place a 10-24 wing nut on the 10-24 6″ threaded rob backwards. Slide hinge over rod and add second wing nut.

Step 6: Drill a little larger than 1/4″ hole through one side of your “L” bracket. Then place split washer over machine screw and put that through the un-drilled side of the L bracket away from the L side. Next add the two remaining washers over the screw for spacing. Connect hinge and rod to this and add your last 10-24 wing nut.

Step 7: Place one of your 1/4″ wing nuts on the 1/4″ threaded rod about half way down the rod upside down. Slide the large hole L Bracket over the rod and screw on the last wing nut. You will instantly see where this can be adjusted to make holding your armature easy.

Finished: Armature tutorial coming soon. Oh your stand is done. Hope this tutorial helped!

Copy-Cat as explained by Gatchagrey:

her background is basically as follows… in the MYP episode “History” there is a scene where he-man a battle cat are pursueing king his down a river of lava..battle cat gets some lave splashed oh his mask andd he man tosses it off of him… this is where my character comes in…she is a young quadian that admires battlecat and had witnessed BC and he-man heading toward the river.. when she see the helmet get tossed she used her grapple claw to retrive it..sort of an ultimate collector item for her…somehow she accidental triggers the power in the mask and she is transformed into a COPY of battle cat……so that is why she uses the BC mask as a shield and has a grapple claw weapon…

Pretty cool idea for a character and well I just had to do a piece of art. Wish I had more time I would’ve really liked to get more involved with this concept.  Anyway check it out at the  forums: Here

If you would like more info check out this link Here

Christmas after Christmas, I have wanted to do some custom artwork for my friends and family. Never before have I actually had the time to accomplish this, but I decided to give it a real shot this year. So I purchased some 4×6 picture frames and began work on the custom art for my friends. I tried to make each one reflect the friend that was receiving the artwork, this was a harder task than I thought it would be. Here are the results of that idea.